FUSION PVCu PRESSURE PIPING SYSTEM
(AGRI PIPING SYSTEM)
Fusion offers an exhaustive range of PVCu pressurce pipes and fittings. Pressure pipes are manufactured as per IS 4985:2000 standard and are available in 20mm to 315mm size in different pressure class. Pipes with both types of joints i.e. solvent cement weld type and elastomeric rubber seal type joints are available. Varieties of moulded fittings are manufactured as per IS 7834:1987. These pipes and fittings are used for variety of applications like agriculture, irrigation, water supply, industrial process lines, swimming pools and fire fighting mains etc.
PVC pipes possess good strength and are highly durable, they are resistant to corrosion, scaling and microbial attack. They are economical, robust, and come in various sizes with a range of pipe fittings. They can be used for both warm and cold water applications.
PVC pipes are designed to resist oxidation and degradation. The lifespan of PVC pipes can be 50 years and longer if installed properly.
SALIENT FEATURES
Corrosion Resistant
High strength
UV Resistant
Light Weight
Maintenance Free
Chemical Resistant
DIMENSIONAL DETAILS
Mechanical properties of PVC-U at 20°C
| Density | 1400-1460 kg/m³ |
| Minimum ultimate tensile strength | 45 Mpa |
| Compressive strength | 66 Mpa |
| Shear strength | 39 Mpa |
| Tensile (Youngs) modules | 2750 Mpa (at high loads) |
| Hardness (Shore) | 85 (ASTM D2240) |
| Hardness (Brinnell) at 23°C | 12-15 |
| Impact (Charpy) -20°C | 20 kJ/m2 (250 µm notch radius) |
| Impact (Charpy) -0°C | 8 kJ/m2 |
| Elongation at break | 50-80% |
| Poisons ratio | 0.35 - 0.4 |
| Electrical properties | 12-38 kV/mm |
| Dielectric strength | 3.0 - 3.2 @ 106 Hz |
| Dielectric Constant | 0.02 @ 106 Hz |
| Surface resistivity | 2000Volts/mm |
Thermal Properties
| Max. continuos service temp | 60°C |
| Specific heat | 1047 J / kg / °C |
| Coefficient of linear expansion | 7 x 10-5 / °C |
| Thermal conductivity | 0.13-0.15 W/ m/°C |
| Flame resistant | Self-extinguishing PVC-U does not support combustion when the source of ignition is removed. At the fabrication temperature, it can be shaped by deformation. |
| Primary softening point | Not less than 80°C (AS 1462) |
| Vicat. softening temperature | 80°C to Bs2782 |
APPLICATIONS
Irrigation
Chemical Distribution
Suitable For Sandy & Saline Water
Industrial Mining
Industrial Use
A Few PVC-U Fittings
PVC COUPLER
PVC ENDCAP
PVC NEOFIT ELBOW
PVC NEOFIT TEE
PVC PN4 REDCUER
PVC PN6 Elbow
PVC PN6 REDUCING TEE
